Log Splitter Operation - Power Fist 8197824 Guide De L'utilisateur

LOG SPLITTER OPERATION

This log splitter is equipped with a "ZHB" control system that requires it to be operated by both of the
user's hands - the left hand controls the hydraulic control lever, while the right hand controls the
pushbutton switch. The log splitter will freeze upon absence of either hand. After both hands release
the controls, the log pusher retracts to the starting position.
A trigger type lock-out device is adopted to avoid accidental hydraulic control lever pushdown. To
operate the hydraulic control lever, draw the trigger backward with the index finger before pushing
the hydraulic control lever forward.
Never force the log splitter for more than 5 seconds by keeping
pressure on it to split excessively hard wood.
After this time interval, the oil under pressure will be overheated and the machine could be
damaged. To split an extremely hard log, rotate it by 90° to see whether it can be split in a different
direction. In any case, if you are not able to split this log, this means that its hardiness exceeds the
capacity of the machine and that log should be discarded to protect the log splitter.
10