• EXTENSION CORDS
Improper use of extension cords may cause inefficient operation of the
log splitter, which can result in overheating. Be sure the extension cord
is no longer than 25 feet and up to 14 gauge, with 3 wires to allow
sufficient current flow to the motor.
Avoid use of free and inadequately insulated connections. Connections
must be made with protected material suitable for outdoor use.
• AVOID ELECTRIAL SHOCK
Check that the electric circuit is adequately protected and that it
corresponds with the power, voltage and frequency of the motor.
Check that there is a grounded connection and a circuit breaker.
Ground the log splitter. Prevent body contact with grounded surfaces :
pipes, radiators, ranges, and refrigerator enclosures.
Never open the pushbutton box on the motor. Should this be necessary,
contact a qualified electrician.
Make sure your fingers do not touch the plug's metal prongs when
plugging or unplugging the log splitter.
• KEEP VISITORS AND CHILDREN AWAY
The log splitter must always be operated by one person only. Other
people should keep a safe distance from the work area, especially
when the log splitter is in operation. Never use another person
to help you with freeing a jammed log.
• INSPECT YOUR LOG
Make sure there are no nails or foreign objects in the log to be split.
The ends of the logs must be cut square. Branches must be cut off
flush with the trunk.
• DON'T OVER REACH
Floor must not be slippery. Keep proper footing and balance at all times.
Never stand on the log splitter. Serious injury could occur if it is
tipped or if the splitting wedge is unintentionally contacted. Do not store
anything above or near the log splitter where anyone might stand on the
tool to reach it.
• AVOID INJURY FROM UNEXPECTED ACCIDENT
Always pay full attention to the movement of the log pusher.
Do not attempt to load the log until the log pusher has stopped.
Keep hands out of the way of all moving parts.
3