Assembly & Installation; Pre-Operation Checks; Before Starting The Engine - Power Fist 8893521 Manuel De L'utilisateur

V 4.0
ASSEMBLY & INSTALLATION
1. The engine comes assembled.
2. The engine is not shipped with oil. Starting the engine without oil will damage
the engine beyond repair. Add oil per the maintenance instructions.
3. Replace oil cap for shipping with the vented/breather oil cap.
4. Check that the filter is in place. See Maintenance – Service the Air Filter
OPERATION

PRE-OPERATION CHECKS

NOTICE! The engine is not shipped with oil. Before starting the engine, add
oil according to the instructions in this manual. Starting the engine without
oil will damage the engine beyond repair.
Check the engine's condition before operating to maximize the user's safety and
the service life of the engine. Ensure that the engine is level and the switch is in
the OFF position before beginning the pre-operation checks.

BEFORE STARTING THE ENGINE

WARNING! Do not start or run engine in an enclosed area, even if the doors
or windows are open. Engine exhaust contains carbon monoxide (see Carbon
Monoxide Precautions).
1. Make sure spark plug (K), muffler (A), fuel cap (D) and air cleaner (B) are
in place and secured.
2. Ensure the spark plug lead is securely connected to the spark plug, otherwise
unintentional sparking can result, causing a fire or electric shock.
3. Check the air filter. A dirty air filter will reduce engine performance.
4. Check that all protective covers and guards are in place.
5. Check that all nuts, bolts and screws are tight.
6. Check the fuel level.
7. Check the engine oil level. Running the engine without enough oil can
damage the engine.
Visit www.princessauto.com for more information
Engine for the 15 Ton Kinetic Log Splitter 8893521
5