Specifications And Technical Data - Lavorwash THERMIC 2W / PRO Notice Technique - Utilisation Et Entretien

EN
WARNING
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20% lower than
the machine's maximum performance.
• The engine's maximum power diminishes as the altitude and ambient temperature at which it is working increases
(there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every 5.6°C/42°F above 16°C/61°F). If
the high pressure water cleaner is used at a high altitude or with high ambient temperature please refer to the
engine's operating and maintenance manual to see if any precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient temperature
of 16°C/61°F.
• If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain conditions
the thermostat valve can open and prevent the complete self-priming of the pump. In these cases, fit a rubber
hose into the hose connection of the thermostatic valve and bring the other end of the hose to the tank from
where the pump takes the water.
• The specifications and technical data are approximate. The manufacturer reserves the right to make all changes
to the machine it deems appropriate.
MOTORISATION
Fuel
Power
Nominal rotation speed - maximum
HYDRAULIC CIRCUIT
Maximum supply water temperature
Minimum supply water temperature
Minimum supply water flow rate (l/min - USgpm)
Maximum supply water pressure
Maximum priming depth
PERFORMANCE
Maximum flow rate (l/min - USgpm)
Nominal flow rate (l/min - USgpm)
Maximum pressure
Nominal pressure
Maximum reaction force on the spray gun
Sound pressure level - Uncertainty
Sound power level
Operator hand-arm vibration - Uncertainty
PUMP OIL
WEIGHT AND DIMENSIONS
Length x width x height (mm - in)
Weight
(1)
Measurements in agreement with EN 60335-2-79.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.

SPECIFICATIONS AND TECHNICAL DATA

9H 2115
HONDA GX270
(kW - HP)
6,7 - 9,0
(RPM)
(°C - °F)
(°C - °F)
(bar - psi)
(m - ft)
(bar - psi) 220 - 3191
(bar - psi) 210 - 3045
(N) 50
(dB(A))
(dB(A))
2
(m/s )
(mm - in)
(kg - lb) 48 - 106
(2)
Also see the corresponding oils table.
THERMIC 2W / PRO
13H 2915
13L 2915
LONCIN G390F HONDA GX390
Petrol
3400 - 3600
60 - 140
5 - 41
20 - 5,3
8 - 116
NO
15 - 4,0
14 - 3,7
310 - 4496
290 - 4206
54
(1)
92,8 – 0,7
(1)
106
(1)
11 – 0,24
ENI MULTITECH THT
850x580x1050 - 33,5x23x41
50 - 110
13L 2517 13H 2517
HONDA GX390
LONCIN G390F
9,6 - 13,0
21 - 5,5
0,5 - 1,7
17 - 4,5
16 - 4,2
260 - 3770
250 - 3625
59,5
(2)
52 - 115
EN
17