Identification Of Components; Safety Devices - Lavorwash THERMIC 2W / PRO Notice Technique - Utilisation Et Entretien

page de 165

/ 165
Matières
Table des Matières
Signets

Table des Matières

Les langues disponibles

ENI MULTITECH THT corresponding oils:

Mobil Mobilfluid 424

Shell Spirax S4 TXM

Castrol Agri Trans Plus 80W

WARNING

• As far as engine lubricants are concerned, refer to the relative operating and maintenance manuals.

Refer to figures 1 to 4.

1 - Pump

2 - Petrol/gasoline engines

3 - Frame

4 - Handle

8 - Warning plate

9 - Accessory rack

11 - Water inlet hose-end fitting

12 - Water inlet hose clamp

13 - ID plate

14 - Base

15 - Water outlet fitting

16 - Water inlet fitting

17 - Pressure regulating knob

18 - Pressure indicator

19 - Spray gun

20 - Thermal valve

21 - Single barrel lance hose

• Pressure unloader/regulation valve

Valve, suitably calibrated by the Manufacturer, for regulating work pressure by means of a knob (17)

and that allows the pumped fluid to return to pump suction thus preventing the onset of dangerous

pressures when closing the spray gun or when trying to set a pressure that is above the maximum

permitted values.

• Spray gun lever lock device.

Safety stop (32) for locking the spray gun (19) lever (33) in the closed position so it cannot be started

accidentally (Fig. 3, position S).

• thermostatic valve: designed to prevent the pump gaskets from overheating during prolonged

operation in bypass.

Make sure the following are inside the pack of the product you have purchased:

• high pressure cleaner;

• high pressure delivery hose;

• spray gun;

Mobil Mobilfluid 426

Total Dynatrans MPV

Chevron Textran THD Premium