Pioneer XV-DV535W Mode D'emploi page 3

[XV-DV535W only]
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: top of the unit
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC).
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation).
DRM (digital rights management) copy protection is
a technology designed to prevent unauthorized
copying by restricting playback, etc. of material on
devices other than the PC (or other WMA recording
equipment) used to record it. For detailed
information, please see the instruction manuals or
help files that came with your PC and/or software.
All manuals and user guides at all-guides.com
[XV-DV535W only]
CAUTION
These speaker terminals carry HAZARDOUS LIVE
D3-4-2-1-9a_En
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
POWER CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that
they are not likely to be stepped on. A damaged power
D3-4-2-2-1a_A_En
cord can cause a fire or give you an electrical shock.
Check the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
C L A S S 1
L A S E R P R O D U C T
D3-4-2-1-8_A_En
D3-4-2-2-3_A_En
S002_En