Arms; Removing Or Replacing Armrest; Removing Flip-Back Armrest - Breezy 1000 Série Mode D'emploi

22
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely – otherwise injury or damage may result.
A. REMOVING OR REPLACING ARMREST (FIGURE 1)
(Removable armrests only)
Make sure the armrest is securely locked BEFORE using the wheelchair.
1. Press the armrest release button (A) located on the armrest.
2. Remove the armrest from the arm sockets (B) by pulling straight up.
3. Replace the armrest by reversing STEPS 1-2.
Breezy Plus Models
NOTE: Armrest may be reversed to allow greater access for propelling.
B. REMOVING FLIP-BACK ARMREST
(4000 Series armrests only)
Make sure the armrest is securely locked BEFORE using the wheelchair.
1. Press the armrest release lever located on the armrest.
2. Flip the armrest back.
3. Unscrew bolt at back of armrest and pull armrest up to remove.
4. Replace the armrest by reversing STEPS 1-3.
E n g l i s h

ARMS

WARNING
WARNING
WARNING
A r m s
B
B
1
A