Panasonic WX-SR202DNP Mode D'emploi page 59

■ Confirm the paired microphones
1
Set the receiver to pairing confirmation mode
Make sure that the [POWER] indicator on the receiver lights green, and shortly press
the [REG] button once on a channel which you choose to check among from the
channels communicating with microphones. Then the receiver enters the pairing
confirmation mode (the [REG] indicator turns green and orange alternately for five
seconds).
Power indicator
Receiver
2
Check the [PWR] indicator on the microphone
While the receiver is in pairing confirmation mode, the [PWR] indicators of the
powered-on microphones paired with the channel which is in pairing confirmation
mode will turn green and orange alternately. This allows to confirm the channel/
microphone pairings.
The pairing confirmation mode lasts for five seconds on both the microphone and the
receiver, after which both will go back to their normal operation mode.
WX-ST200P
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Register indicator
Register button
WX-ST400P
Power
indicator
59
* The illustration shows
WX-SR204DNP.
Power indicator
59
2022/04/27 13:17:46