Panasonic WX-SR202DNP Mode D'emploi page 30

Connections
■ Connecting with antennas
Up to 8 wireless antennas can be connected at once.
The antenna connected to the [ANTENNA 1] connector will be used as the reference
antenna for wireless synchronization. Always connect a reference antenna when choosing
either "main system" or "sub-system" as the wireless synchronization setting (page 46).
1
Connect the "Wireless antenna connector" on the receiver to the
"Wireless receiver connector" on the antenna via a LAN cable
(page 24)
Antenna 8
Receiver
Wireless antenna connectors 1 to 8
● The wireless antenna connectors for this product are the proprietary
type.
Important
Do not connect any PoE devices (hubs or routers equipped with PoE).
Doing so may cause malfunctions.
Important
● Use a straight (non-crossover) LAN cable for the connection. Using a
crossover LAN cable may cause the antenna to malfunction.
● A reference antenna (connected to [ANTENNA 1]) is necessary when the
system is set as either main system or sub-system.
● Use a LAN cable shorter than 200 m (656 ft).
30
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
LAN cable
30
Antenna 2 Antenna 1
* The illustration shows
WX-SR204DNP.
Wireless receiver
connector
(inside the
connector cover)
To AC120 V
60 Hz
electric outlet
2022/04/27 13:17:39