Panasonic WX-SR202DNP Mode D'emploi page 18

Parts and their names
7 A ntenna indicators [ANTENNA 1/2/3/4/5/6/7/8]
They show the system status during start-up ("Operation" (page 56)) and show the
status of connected antennas during operation.
On (green):
On (orange):
Blinking (orange): Updating antenna
Blinking (red):
On (red):
Alternately blinking (red/green):
Off:
8 S ynchronization indicator [SYNC] (green)
If the system is set as either "main system" or "sub-system" in the wireless
synchronization settings, this indicator shows the wireless synchronization status
Important
between systems (receivers).
On: Synchronized
Blinking: Not synchronized
Off: Stand-alone system (if the wireless synchronization configuration switch is
set to "Stand-alone system")
● Main system:
The system (receiver) acting as the reference for the wireless
synchronization
● Sub-system:
The systems (receivers) synchronized to the main system when
operating with wireless synchronization
● Stand-alone system:
Systems (receivers) which are not synchronized to other systems
18
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Important
Normal connection
Connection error with the antenna
● Checks the connection with the antennas during the
start-up of the receiver. If an antenna is connected
while the receiver is already turned ON, the antenna
changes the other antenna and the antenna indicator
will light up orange.
● If the [ANTENNA] indicator for the antenna 1
(reference antenna) lights orange, restart the system
in order to restore the reference antenna.
Antenna malfunction, lost cable connection to the antenna during
operation
Communication error, power supply error
When the firmware version of the connected antenna
(WX-SA250P) is V1.00
● The microphone audio will not be output properly.
The firmware version needs to be upgraded.
Important
Contact a retailer.
No connection
18 2022/04/27 13:17:38