Panasonic WX-SR202DNP Mode D'emploi page 14

Precautions
Do not place on unstable surfaces
Failing to do so may cause the product to fall leading to accidents and injuries.
Do not use where there is a risk of exceeding the maximum recommended
wattage for the socket or the wiring, and only use AC 120 V
Overloading multi-outlet extension cords could result in overheating and fires.
Do not let foreign substances into the product
Water or metals entering the antenna may lead to fires or electric shocks.
● Immediately remove the power cord and contact the retailer.
Avoid damaging the power cord and power plug
(by breaking them, tampering with them, bringing them near heat sources,
bending them excessively, twisting them, pulling on them, placing heavy
objects on them, tying them, etc.)
Using a damaged power cord or power plug may cause electric shocks, short circuits, or
fires.
● Entrust the repair of the power cord and power plug to a retailer.
Do not insert or pull the power plug with wet hands
Failing to do so may cause electric shocks.
Hold the power plug to disconnect the power cord
Do not pull the power cord since it can cause fire, electric shock, etc.
Do not attempt to disassemble or remodel the product
It may lead to fire or electric shock.
Do not wet
It may lead to fire or electric shock.
● Immediately remove the batteries and contact the retailer.
Do not place containers full of water or other liquids on or near the product
If wet, the product may lead to fire or electric shocks.
● Immediately remove the power cord and contact the retailer.
Do not perform the installation and wiring work during a thunderstorm
It may lead to fire or electric shock.
14
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb 14 2022/04/27 13:17:37