Panasonic WX-SR202DNP Mode D'emploi page 25

■ Installing in a rack
The receiver can be installed within a rack.
Use one of the following racks (sold separately) for installation.
EIA-standard product: EIA 19-inch rack, at least 450 mm (17-5/8 inches) long
1
Remove the rubber feet (x4) on the bottom of the receiver
2
Use the included rack-bracket screws (x4) to attach the rackmount
brackets to both sides of the receiver
● Rack-bracket screws torque: 0.88 N•m to 1.08 N•m (9.0 kgf•cm to 11.0 kgf•cm)
Rackmount bracket
(Both sides)
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Rubber feet
25
* The illustration shows WX-SR204DNP.
Rack-bracket
screws
x4
* The illustration shows WX-SR204DNP.
25
2022/04/27 13:17:38