Panasonic WX-SR202DNP Mode D'emploi page 31

■ Connecting the Euroblock connector
The audio input and output connectors of the receiver use the removable Euroblock
connector.
1
Connecting wires to the included Euroblock connector
Use a flat-head screwdriver to loosen the screws on the Euroblock connector. Remove
a piece of coating from the wire to expose the conductor. Twist the conductor and
insert it into the Euroblock connector. Finally, tighten the screws on the Euroblock
connector.
7 mm ± 1 mm
(1/4 inches ± 1/16 inches)
Important
Cable specifics
● Recommended cable: AWG 16 to 28 (do not use soldered cables)
● Length of the coating to be removed: 7 mm ± 1 mm (1/4 inches ± 1/16
inches)
● Screw diameter: 2 mm (1/16 inches)
● Make sure that the wires are securely connected.
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb 31
31
2022/04/27 13:17:40