How To Use - Panasonic WX-SR202DNP Mode D'emploi

How to use

■ Operation
Follow the steps below to operate the product.
Power indicator
Receiver
Power switch
1
Turn ON the receiver
Turn the power switch of the receiver to ON.
● The [POWER] indicator on the receiver lights green.
● During the start-up process, the [ANTENNA] indicators change as shown in the
figure below. All [ANTENNA] indicators light in the beginning, and they gradually go
off as start-up progresses. Once start-up is completed, all they go off. After start-up,
they will show the connection status of their relative antennas.
Important
8 indicators 6 indicators
on
● See the table on "System start-up time" (page 16) for average
2
Turn ON the microphone
Turn the power switch of the microphone to ON.
● The [RF LEVEL] indicator of the channel to which the microphone is paired lights
on.
● The [AUDIO] indicator lights on when audio is input to the microphone.
3
Adjust the microphone volume
Adjust the volume adjustment knob.
56
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Reception
level indicator
Volume adjustment knob
Antenna indicator
4 indicators
on on
System starting up
start-up times.
56
Audio level indicator
* The illustration shows
2 indicators All indicators off
on (start-up complete)
WX-SR204DNP.
(Actual
antenna
connection
status)
Operating
2022/04/27 13:17:45