Panasonic WX-SR202DNP Mode D'emploi page 20

Parts and their names
n P airing button
This button controls the pairing between microphones and each channel on the receiver.
● Pairing:
● Pairing confirmation: Shortly press the [REG] button to enter pairing confirmation
The external remote state can be forcibly canceled by keeping the [REG] buttons of CH1
and CH2 pressed simultaneously for more than two seconds while the receiver is
powered ON.
o P airing indicator [REG]
Shows the current operation mode (pairing, pairing confirmation) of the channel.
Off:
Blinking (orange):
On (green) (1 second):
Alternately blinking (orange/green) : Pairing confirmation
Rear
p q
p N etwork connector [100BASE-TX]
Connect a LAN cable Cat 5 (or Cat 5e or Cat 6) (locally procured) to the PC with the
support software installed for configuration and maintenance.
q E xtension receiver connector [EXT OUT] (WX-SR204DNP only)
Used when connecting an extension receiver to this product.
Use a LAN cable to connect the extension receiver (page 33).
20
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Keep the [REG] button pressed for more than two seconds to
enter pairing mode. (page 52)
Exit pairing mode by shortly pressing the [REG] button once
while in pairing mode.
A channel cannot enter pairing mode when the microphones
paired to that channel are currently active.
mode. (page 59)
Exit pairing confirmation mode by shortly pressing the [REG]
button once more.
Standard mode
Pairing mode
Pairing successful
s
r u v u v w x
20
* The illustration shows
t
WX-SR204DNP.
y z
2022/04/27 13:17:38