Panasonic WX-SR202DNP Mode D'emploi page 32

Connections
■ Connecting audio output
It is possible to mix the audio from the microphones of each channel and output this as an
analog audio signal to the amplifier (or mixer).
Connect an external device such as an amplifier to the [MIX OUT] connector on the
receiver.
1
Connect the wires to the included Euroblock connector
Connect the cables to the included Euroblock connector (6-pin) to connect to the [MIX
OUT] connector of this product.
Antenna 8
Wireless receiver
connector
(inside the
connector cover)
Wireless antenna
Important
connectors 1 to 8
● Thoroughly connect the Euroblock connector to the receiver.
32
PUQX1039ZAV1_WX-SR202DNP_OI_en-fr.indb
Antenna 2
LAN cable
Receiver (WX-SR204DNP)
32
Antenna 1
MIX output connector
To an amplifier or mixer
To AC120 V
60 Hz
electric outlet
2022/04/27 13:17:40