STEINEL XLED PRO ONE S Mode D'emploi page 72

8 Install mode (test mode): Install mode has the
purpose of checking for proper working order as well
for testing the detection zone. Irrespective of light
level, the floodlight switches ON for 10 s in response
to movement. Movement is signalised by the status
LED. Install mode has priority over all other settings.
Install mode ends automatically after 10 min. Install
mode ends immediately after pressing reset.
Note: Teach mode and Install mode cannot be used
at the same time.
Reset: Resets all settings to the values manually
9
selected on the floodlight or to the factory settings.
10 Basic light level: The basic level of lighting from
basic light LEDs provides a low level of illumination.
The main light is only switched ON for the preset
time in response to movement within the detection
zone. The light then switches to the selected basic
brightness.
➔ Basic light level (J)
Intelligent remote control (optional)
(EAN 4007841009151)
– Control via smartphone or tablet.
– Replaces the remote control.
• Load appropriate app and connect via Bluetooth.
– 31 –
Index