Lubrication; Blade Life - Panasonic ER2403 Mode D'emploi

After using the trimmer
Using the cleaning brush

1. Hold the main body, place your
thumb against the blades and then
push them away from the main
body.
2. Brush off any hair trimmings from
the main body and from around the
blade.
3. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
Washing with water

The following is the symbol for a wet trimmer. The
symbol means the hand-held part may be used in a
bath or shower.
1. Remove the blade.
2. Rinse off any hair trimmings that are
sticking to the blade with running
water.
4
ER2403_EU.indb 4
3. Rinse out any hair trimmings that
are inside the trimmer with running
water.
• We strongly recommend that you do not
remove the battery cover when washing
the main body.
4. Gently shake the trimmer 4 or 5 times and then wipe off
any water drops from the trimmer and the blade.
5. Place the trimmer on a towel with the switch on the
main body facing downwards to let it dry fully.

Lubrication

Lubricate the blades before using them or
after cleaning them.
1. Apply a few drops of the oil to the
points indicated by the arrows.
Remounting the blade
1. Fit the mounting hook into the blade
mounting on the trimmer and then push
in until it clicks.
Blade life

Blade life varies according to the frequency and length of use of
the trimmer.
For example, the blade life is approximately 3 years when using
the trimmer for 5 minutes 10 times a month. Replace the blades if
cutting efficiency reduces substantially despite proper
maintenance.
2007/05/23 16:36:36