Maintenance And Cleaning; Declaration Of Conformity (Doc) - Renkforce 808576 Notice D'emploi

All manuals and user guides at all-guides.com

15. Maintenance and Cleaning

The product is maintenance-free for you. Servicing or repair must only be carried out by a specialist or
specialist workshop. There are no components on the inside of the product that need maintenance by you;
this is why you should never open/disassemble it (except for battery change in the IR remote control).
A dry, soft and clean cloth is sufficient for cleaning the outside.
Do not push too hard on the camera lens display, as this may cause scratch marks or lead to malfunc-
tions.
A commercial TFT cleaner for example can be used for stronger contamination of the screen/DVR display.
Never spray it right onto the screen/DVR, however!
Remove dust on the screen/DVR with a long-haired, soft and clean brush and a vacuum cleaner.
To remove contamination at the radio camera, use a soft cloth slightly moistened with lukewarm water.
Never point the water jet of a garden hose or a high-pressure cleaner or similar at the radio camera.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since
these may damage the casing or even impair function.

16. Declaration of Conformity (DOC)

We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product com-
plies with the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The compliance statement for this product is available at www.conrad.com.
68