Renkforce 808576 Notice D'emploi page 59

e) Submenu „System Setup"
In the OSD menu, use the buttons „4" and „6" to select the submenu „System Setup" and push the button
„ ".
Function „Date Time Setup"
Set the current date and time here.
Proceed as follows:
• Use the buttons „4" and „6" to pick the function „Date Time Setup" and then push „
• Use the buttons „4" and „6" to switch between year, month, day, hours, minutes and seconds.
The respective active input item is highlighted red. Change the value via the buttons „8" and „2".
• Confirm the setting with „
• If required, push the button „MENU" repeatedly to return to the respective previous menu or to leave the
OSD menu.
Function „Load Default Setting"
Use this function or recover the basic settings ex works.
Proceed as follows:
• Use the buttons „4" and „6" to pick the function „Load Default Setting" and then push „
• Use the buttons „4" and „6" to switch between „YES" (reset default settings) and „NO" (cancel).
• Confirm the selection with „
• If required, push the button „MENU" repeatedly to return to the respective previous menu or to leave the
OSD menu.
Function „SD Format"
If required, the inserted memory card can be reformatted. This not only can be used for quick and complete
deletion of the memory card. Reformatting can also ensure that the memory card contains the right file
format for the screen/DVR to store recordings on the memory card.
Proceed as follows:
• Use the buttons „4" and „6" to pick the function „SD Format" and then push „
• Use the buttons „4" and „6" to switch between „YES" (format memory card) and „NO" (cancel).
When formatting the memory card, all data saved on it are lost.
• Confirm the selection with „
• If required, push the button „MENU" repeatedly to return to the respective previous menu or to leave the
OSD menu.
All manuals and user guides at all-guides.com
".
".
".
".
".
".
59