Changing The Pin; Setting The Language; Forgotten Pin; Setting The Date And Time - Grizzly MR 1000 Traduction De La Notice D'utilisation Originale

All manuals and user guides at all-guides.com
2. Press the power key (17) on the LCD
display's control panel.
The LCD display (23) is illuminated.
Switching the automatic lawn mower
off
3. Press the on/off switch (5) on the un-
derside of the automatic lawn mower
(position "0").
Settings
If the factory settings are not adequate for
your situation, the automatic lawn mower
has the following options, which you can
set using the control panel (15).

Setting the language

1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (23) with the
4-digit PIN. This is set to "1-2-3-4" ex-
factory.
3. Use the arrow keys (20) to select the
"General settings" symbol.
4. Confirm the selection with the
OK key (22).
5. Use the arrow keys (20) to navigate to
"Language" (third option of the 4 se-
lection options).
6. Confirm the selection with the OK key
(22).
7. Use the arrow keys (20) to select the
desired language.
8. Confirm the selection with the OK key
(22).
9. Return to the main menu with the back
key (21).
10. Confirm the selection with the OK key
(22).

Changing the PIN

1. Open the cover on the LCD display
(2).
2. Unlock the LCD display (15) with the
4-digit PIN. This is set to "1-2-3-4" ex-
factory.
3. Use the arrow keys to select the
"Change PIN symbol".
4. Confirm the selection with the OK key.
5. Enter the old 4-digit PIN.
6. Confirm this with the OK key.
7. Enter a new 4-digit PIN.
8. save this with the OK key.
9. Return to the main menu with the back
key (21).

Forgotten PIN

If you have forgotten your PIN, you can
reset it by generating a PUK.
1. Switch the on/off switch (5) to "ON"
(LCD display is off).
2. Press and hold down the OK key (22)
and power key (17) simultaneously for
4 seconds.
3. Select "1 - Generate PUK" from the
menu.
4. Confirm the selection with the OK key
(22).
5. Forward the PUK displayed to the Ser-
vice Centre (see "Service Centre") to
restore your PIN.

Setting the date and time

1. Open the cover on the LCD display
(2).
2. Unlock the LCD display with the 4-digit
PIN. This is set to "1-2-3-4" ex-factory.
3. Use the arrow keys (20) to select the
"General settings" symbol.
GB
83