Start-Up; Checking The Battery Charge; Selecting The Application Tool; Attach Sanding Sheet To Grinding Plate - Parkside PAMFW 10.8 A1 Instructions D'utilisation Et Consignes De Sécurité

Start-up

Checking the battery charge

When the device is on, the battery status indicator
indicates the status or the remaining power as follows:
RED / ORANGE / GREEN = maximum
charge / power
RED / ORANGE = medium charge / power
RED = low charge – recharge battery

Selecting the application tool

Note: The universal system with easy tool change
fits common accessories.
HCS plunge saw blade 95 x 32 mm
Materials:
Wood, plastic, plaster and other soft materials
Use:
· Cut-off and plunge saw cuts
· sawing close to the edge, even in hard to reach
areas
Example: cutting notches in light construction walls.
(see Fig. A and B)
Diamond saw blade
Material:
Tile cement, Tile joints
All manuals and user guides at all-guides.com
Use:
·
·
2
Scraper
Materials: Motor / cement residue, tile / carpet
adhesive, paint / silicone residue
Use:
·
Grinding plate
Materials:
Wood and metal (sanding sheets included),
paint*, stone*
*depending on sanding sheet
Use:
·
Removing material residue, for example tile
cement when replacing damaged tiles
Reaming out joint compound between wall and
floor tiles (see Fig. C)
Removing material residue, for example carpet
adhesive residue on floors (see Fig. D)
Sanding edges and hard to reach areas
(see Fig. E and F)
Attach sanding sheet
to grinding plate
Centre the sanding sheet
plate .
14
Start-up
on the grinding
15
GB/IE 11