Installing Debris Shield - Maruyama B42L Manuel Du Propriétaire/De L'utilisateur

Installing Debris Shield

[B42L, B42]
WARNING
POTENTIAL HAZARD
• Foreign objects can be thrown by the
Trimmer/Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injur y.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer/Brushcutter
without the debris shield in place.
Debris Shield
Attach the debris shield to the gearcase with the two
M6 x 30 screws as shown on Fig. 1.
Extension Shield
(Install the string cutoff blade and shield extension to
the debris shield.)
1. Insert the square nut into shield extension as
shown on Fig. 2.
Square nut
All manuals and user guides at all-guides.com
M6 x 30 Screw (2)
Gearcase
Debris Shield
Fig.1
Shield extension
Fig.2
2. Attach the String Cutoff Blade to shield extension
using M5 x 20 Screw, locking with square nut (on
Fig.2) as shown on Fig. 3 .
String Cut off Blade
M5 x 20 Screw
Fig.3
3. Enter the guide in the slot of debris shield on Fig.
4. Make sure place the three hooks into the posi-
tion on the shield as shown on Fig.5.
Debris Shield
Shield extension Hook
[B42A]
POTENTIAL HAZARD
• Foreign objects can be thrown by the
Trimmer/Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injur y.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer/Brushcutter
without the debris shield in place.
Debris Shield
Attach the debris shield to the gearcase with the four
M5 10 screws.
×
Gearcase
— US-12 —
Guide
Hook
Fig.4
WARNING
Debris Shield
Screws (4)
Fig.5