Maruyama B42L Manuel Du Propriétaire/De L'utilisateur page 10

3. Avoid using the Brushcutter near rocks, gravel,
stones and similar material which can become
dangerous projectiles.
4. Inspect your work area before you begin. Remove
objects such as broken glass, nails, wire and rocks
which can become dangerous projectiles if thrown
by the Trimmer/Brushcutter. Remove string, rope
or similar materials which can become entangled
in the cutting head.
5. Keep children, bystanders and animals outside
a 50 ft. (15 m) radius from the operator and
Trimmer/Brushcutter.
50 ft. (15 m Minimum)
6. If you are approached while operating the
Trimmer/Brushcutter, stop the engine and cutting
head rotation.
7. Never allow children to operate the Trimmer/
Brushcutter.
8. Use the Trimmer/Brushcutter only in daylight or
good artificial light.
9. Never operate the Trimmer/Brushcutter without
proper guards or other protective safety devices in
place.
10. Always keep the Trimmer/Brushcutter on the right
side of your body.
11. Do not raise the cutting head above waist level.
All manuals and user guides at all-guides.com
12. Do not put hands or feet near or under any rotating
13. When cutting heavy brush or small trees, always
Direction of Motion
14. Keep firm footing and balance. Do not overreach.
15. Use the right tool for the job. Do not use the
— US-9 —
parts. Keep clear at all times. Keep all parts of
your body away from the rotating cutting attach-
ment and hot surfaces such as the muffler.
move the Brushcutter from right to left to prevent
kick-back .
No Kick-back Zone
CORRECT
INCORRECT
Trimmer/Brushcutter for any job that is not rec-
ommended by Maruyama.
Direction of Motion
DANGER – Kick-back Zone