Setting The Current Time; Maintenance And Cleaning - Domo DO417KT Mode D'emploi

All manuals and user guides at all-guides.com
DO417KT

SETTING THE CURRENT TIME

Place the plug in the socket. The display will show "12.00".
For setting the current time, press the "HOUR" button for setting the hours, press the
"MIN" button for setting the minutes. On the display will show "AM" or "PM" to
indicate the morning or afternoon.
PROGRAMMING
Fill the appliance with water and coffee.
Press the "PROGRAM" button, until the word "program" start flashing on the display.
Set the hour and minutes. After setting the desired hour, it will flash for a few more
seconds, before returning to the current time. The programmed time is now set.
Press the "AUTO" button, the indicator light will light up and on the display the word
"auto" is shown. The coffee maker is now programmed and will start automatically.
When there are current fluctuations, it is possible that the timer doesn't function
properly and that you need to set the program time again.
When you want to reuse the previous set program time, simple press the "AUTO"
button, your coffee maker is again set to start working on the pervious programmed
time.

MAINTENANCE AND CLEANING

Remove the plug from the socket before cleaning.
The filter holder can be removed for cleaning.
Clean the outside of the appliance regularly with a damp cloth. Dry thoroughly
afterwards.
Don't use any abrasive cleaners.
The hot plate needs to be cold before cleaning.
Never immerse the appliance in water.
Never use a cloth for cleaning the water tank. Little please of fabric could be left in the
water tank. Rinse the water reservoir regularly with cold water.
DESCALING
Descale your coffee maker regularly. At normal use ( 2 full carafes a day) we
recommend the following rules :
Water hardness upto 18°dh : 2 to 3 times a year.
Water hardness above 18°dh : 4 to 5 times a year.
The water distribution in your area, can provide you the necessary info concerning
your water hardness.
For descalling the appliance you should fill the coffee maker with vinegar and let it
run through twice. Afterwards, let the coffee maker work twice with clean water, to
remove the vinegar taste and all scale residue.
Clean the carafe, the lid and the filter holder.