Reely ROAD T-MAX Notice D'emploi page 36

All manuals and user guides at all-guides.com
The following functions are available:
1. Maximum brake force: Here you can determine the brake force to be applied when braking. In general, "100%"
should be selected.
~ 60% brake force
~ 100% brake force
2. Engine braking: This function simulates the braking characteristics of a "normal" electric engine when the throttle
is released (neutral position on remote control).
~ Switched off, 0% brake force
~ Switched on, 10% brake force
3. Selecting the rechargeable battery type: Select between NiMH and LiPo rechargeable batteries.
Make sure you select "LiPo". Otherwise the LiPo battery pack can be totally discharged (with NiMH
batteries undervoltage is recognised from 4.5 V downwards) and thus destroyed.
Due to the high power requirement, the vehicle should only be operated with full-load LiPo rechargeable
battery packs.
~ NiMH
~ LiPo
4. Switching reverse drive on/off: If needed, reverse drive can be activated.
~ reverse drive off
~ reverse drive on
Once the speed controller has been through all the functions, it begins at the first function again. You
can continue programming.
To exit programming mode, simply switch off the speed controller ("OFF" position).
36