Preparation; Battery Installation - Omron 7 Serie Manuel

HEM-7320T-Z_A_M.book Page 7 Wednesday, May 7, 2014 4:38 PM

2. Preparation

2.1 Battery Installation

1.
Remove the battery cover.
2.
Insert 4 "AA" batteries as
indicated in the battery
compartment.
3.
Replace the battery cover.
Notes:
• When the low battery symbol (
at the same time. Long life alkaline batteries are recommended.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• Dispose of the device, components and optional accessories according to applicable local regulations.
Unlawful disposal may cause environmental pollution.
) appears on the display, turn the monitor off, then replace all batteries
EN
7