Connection Pressure And Gas Categories; Electrical Installation; Mains Connection - Dometic RMDT8501 Instructions De Montage

Installation
4.8.1 Connection pressure and
gas categories
The appliance is operated using the gases and
inlet pressures stated below. The pressure
reducing valve between the gas cylinder and
oven to be used must comply with the catego-
ries stated in the following table.
Gas categories
Category
Pressure in mbar
Country
I3B / P(30) 30
AT,CH,DE,DK,FI,NL,
30
NO,SE
I3+ (28-30/37) 28-30
BE,CH,ES,FR,GB,GR,
37
IE,IS,IT
Oven burner features
Burner Category
Ofenbrenner
I3B / P(30)
(1,2 kW)
Grillbrenner
I3+ (28-30/37)
(1,6 kW)
All manuals and user guides at all-guides.com
Gas
Butan
Propan
Butan
Propan
Tab. 1
Nozzle type
53
62
Tab. 2
20
4.9

Electrical installation

WARNING!
The electrical installation shall be carried
out by qualified personnel* only.
* Qualified personnel are accredited experts who are
able, by virtue of their training and knowledge, to
install the appliance correctly.
The electrical installation must be in
accordance with the national regulations
of the respective countries.
The connection cables must be routed in
a way to prevent contact with hot com-
ponents of the unit/burner or with sharp
edges.
Changes to the internal electrical instal-
lation or the connection of other electri-
cal components (e.g. external fan) to the
internal wiring of the appliance will ren-
der the e1/ CE admittance as well as any
claims from warranty and product liabili-
ty void!

4.9.1 Mains connection

The power should be supplied by a pro-
perly grounded socket outlet or a groun-
ded non-detachable connection. Where
a socket outlet with mains supply is
used, the outlet must be freely accessi-
ble.
Should the connection cable be dama-
ged, have it replaced by Dometic
Customer Services or by qualified per-
sonnel to avoid hazards.
We recommend leading the power supply via
a board-side fuse protection