Attach the deflector plate so that the heated
air escapes through the top ventilation grill into
the open air and no heat build-up can be pro-
duced.
The refrigerator is later pushed into the instal-
lation recess from the front. Ensure that the
seals abut the case evenly.
This installation option facilitates the removal
and installation of the appliance for servicing.
Proposal 1
1
1
Fig. 7
All manuals and user guides at all-guides.com
2
Fig. 8
2
Fig. 9
11
Proposal 2
Fasten the sealing lips to a stop bar on the
rear side (1), e.g. by gluing.
1
If the cavity between the caravan wall and the
refrigerator is sealed so that fumes cannot
penetrate the living area it is possible to vent
the flue gas directly through the upper grille
without using the aluminium flue pipe. The
waste gases escape to the outside through
the upper grill of the ventilation. Do not use
any kind of aluminium flue pipe to lead the flue
gas out.
Deviations shall require the consent of the
manufacturer.
Installation
Fig. 10