Automatic Image Cropping; Connect Scanner To A Pc; Pc System Requirements - Kodak P460 Guide De L'utilisateur

When scanning is completed, the Power and Status/Card indicator lights blink while the scanner stores the
photo on the memory card.
Wait until the indicator lights stop blinking before inserting and scanning the next photo.
CAUTION: Insert only one filmstrip at a time, and insert the next filmstrip only when the previous one is done. Otherwise
the scanner may malfunction.
 Do not remove the memory card or disconnect the power supply while the indicators are blinking.
 This scanner produces JPEG (.jpg) file formats. The date/ time attribute will not be added.
 If the memory card is nearly full (less than 1 MB remaining), the Status/Card indicator blinks (refer to "Indicator Lights" on
page 5). Use another card or transfer pictures to your computer.
To remove the 35mm Negative adapter after all filmstrips are scanned, gently pull it out from the feed slot.
To power down the scanner, press and hold the power button for one second. The power indicator will blink
and then go off.
Now you can safely disconnect the power and remove the memory card from the scanner.

Automatic Image Cropping

The scanner has a built-in cropping function that detects and crops dark edges of an original during the scan process (see
following illustration).
Use the plastic sheath when scanning originals that are sized or shaped other than the standard 3.5"x5" or 4"x6".
Depending on the shape, you may want to perform additional manual cropping on the scanned image, using your own
photo editing software, to achieve your desired final image.
 When scanning darker originals (for example, a photo of the night sky),
over-cropping may occur. Please insert the original in a different direction
(orientation) and try again.
 When scanning over-exposed, older or lighter color (faded) filmstrip originals,
an irregular auto-cropping may occur. Cut the filmstrip into individual films and
rescan them.
C o n n e c t S c a n n e r t o a P C
By connecting the scanner to a computer, you can access the scanned pictures on the memory card directly, or use the scanner
as a memory card reader, so that you can freely copy, paste or delete files to and from the memory card using the PC.

PC System Requirements

Operating system: WINDOWS XP, VISTA, WINDOWS 7 or later - 32 bit
USB Port Supported: USB 1.1 or 2.0 port
1. Connect the plug on the power adapter cord to the power connector on the scanner.
10 Customer Support: http://www.pandigital.net/kodaksupport
All manuals and user guides at all-guides.com
Cropping size (as measured on the original)
Max.
1.5mm
Original
Max. 1.5mm
Max.
1.5mm
Max. 1.5mm
Scanned image