Spypoint IR-C Manuel De L'utilisateur page 14

26
Quality : Increases or decreases photo quality.
Higher photo resolution will lower
memory capacity in memory card.
High = 8MP
Normal = 5MP
Low = 3MP
VIew / TV
To view recorded photos or videos on camera screen or on a
TV set at home.
Viewing with the 2.4" sCReeN
•
View/TV, last photos or videos recorded in camera will appear
on screen. Press "UP" or "Down" to view next or previous
images.
Press "Ok / Menu" to view different options available in View/
TV mode.
date and time : Increases size of Date and Time already
imprinted on a recorded photo when it
appears on the screen.
erase : Erases the photo or the video on the screen.
erase all : Erases all stored photos and videos,
exclusive of protected photos and videos.
Format :
Formats memory card and erases all
protected photos and videos.
Protect : Protects the photo or the video on screen.
exit : Returns to viewing screen.
watching on TV
: To transfer/project photos and videos
•
on a TV screen, use the video cable (supplied) and plug in TV/
Out port of camera to Video In of TV set. Viewing screen menu
will also appear on TV screen.
All manuals and user guides at all-guides.com
: When camera is set to
DISTANCE
The distance dial sets the motion detector
sensitivity. Use this feature to set the
detection range required. Turn dial to the
right to increase distance. Range of detector
is between 5 and 50ft. The best method
to determine a proper distance is to turn
"MODE" switch to "Test" and to walk
perpendicularly to the front of the camera where action is
anticipated. When the detector is activated, the test light on the
front of the camera will blink once. At this moment, the camera
operator may want to adjust the distance setting, and/or change
the direction or height of the camera.
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera off and use the USB cable (supplied) to connect
the camera to your computer. The computer will then recognize
the camera as a removable disk drive. Camera operator must
wait until the termination of computer software installation
(few seconds) before clicking on Desktop. Then, click on
removable disk and look to find folder with DCIM. Click on
the DCIM folder and all the photos and videos will be found in
100DSCIM folder. Photos and videos can be viewed, edited or
deleted with your computer's software.
Taking the SD card out of the camera and inserting it in the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
27