Installation instructions
4-Wire branch circuit (for US and
CANADA)
Refer to the following Figure:
• Disconnect ground from neutral at free end of
conduit.
• Connect the green GROUND wire from the
oven to the GROUND wire in the junction box
(bare or green colored wire).
• Connect the red and black leads from the
oven to the corresponding leads in the
junction box.
After installation
The oven only functions when the door is closed
correctly.
After the first use, clean the inside of the oven and
the accessories, following the cleaning instructions
given
in
the
section
maintenance".
EN
"Oven
cleaning
and
35