Troubleshooting Guide - shark Infinity NR90C Manuel D'utilisation

TROUBLE SHOOTING GUIDE
PROBLEM
1. Not properly plugged into wall
Cleaner Won't
2. No electricity in wall outlet.
Run
3. On/Off switch not turned on.
4. Motor thermostat tripped.
1. Full or clogged dust cup.
2. Wrong carpet height setting.
3. Clogged air path.
Cleaner Won't
4. Clogged hose.
Pick Up
5. Broken belt.
6. Telescopic wand not inserted
7. Dirty filters.
Cleaner Picks
Up Moveable
Rugs Or
1. Wrong carpet height setting.
Pushes Too
Hard
Agitator Does
1. Broken belt.
Not Turn
2. Belt installed incorrectly.
Air Flow
Restricted With
1. Attachment use restricts air flow.
Attachment
2. New carpet debris clogging air
Use Sound
Changes
POSSIBLE CAUSE
outlet.
fully.
path.
POSSIBLE SOLUTION
1. Plug in firmly.
2. Reset circuit breaker or replace
fuse.
3. Push on/off switch to on
4. Reset motor thermostat.
1. Clean dust cup.
2. Adjust setting.
3. Remove obstruction.
4. Remove obstruction.
5. Replace belt.
6. Push telescopic wand in
securely.
7. Clean / change filters
1. Adjust setting.
1. Replace belt.
2. Check belt changing.
1. Open the manual suction control
on the handle of the flexible hose.
2. Remove obstruction.
11