Troubleshooting Guide; Guarantee - shark NZ801EUT Mode D'emploi

TROUBLESHOOTING
GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn
power off and unplug unit before servicing�
Vacuum is not picking up debris� No suction or light suction�
(Refer to Maintenance section for more information�)
• Check filters to see if they need cleaning. Follow instructions for rinsing and drying the
filters before re-inserting in the vacuum.
• Dust cup may be full; empty dust cup.
• Check hose, hose connections, nozzle, and accessories for blockages; clear blockages if
required.
• Remove any string, carpet fibres, or hair that may be wrapped around the brush-rolls.
Vacuum lifts area rugs�
• Turn off unit to disengage the brush-rolls. Move switch to Hard Floor setting to turn on
the slow brush-rolls, which is optimal for bare floors and area rugs.
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn
edges.
• To minimise suction, refer to Suction Control section for more information on how to use.
Brush-roll/soft roller does not spin�
• If Brush-roll Indicator Light on the floor nozzle turns red, the brush-roll and/or soft
roller have stopped spinning. Immediately turn off and unplug vacuum. Disconnect the
nozzle and remove blockage, then reconnect and turn vacuum back on.
• If Brush-roll Indicator light repeatedly turns red while vacuuming carpet, try moving
Suction Control slide to MIN.
• With the power on, recline the handle, which will automatically turn on the brush-rolls.
Vacuum turns off on its own or Brush-roll Indicator Light flashes red�
• This vacuum is equipped with a motor-protective thermostat. If your vacuum
overheats, the thermostat will automatically turn the suction motor off. Perform the
following steps to restart the thermostat:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check for blockages in hose, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 45 minutes.
5. Plug in vacuum and turn it on.
• If hose is not fully connected to the pod, it can cause a poor electrical connection and
the hose can come loose, turning the vacuum off.
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters.
3. Check for blockages in hose, accessories, and inlet openings.
4. Remove cord from cord hook so hose latch can be seen and engaged.
5. Ensure you hear an audible click at all connection points:
a. Where hose meets back of pod (may require additional force; pull on hose to
ensure latch is fully engaged)
b. Where wand plugs into floor nozzle
c. Where handle plugs into wand
6. Plug in vacuum and turn it on.
Note: If vacuum still does not start, contact Customer Service at 0800 862 0453.
19
s h a r kc l e a n . e u
GUARANTEE TERMS
AND CONDITIONS
When a consumer buys a product in the Europe, they get the benefit of legal rights relating to the quality
of the product (your "statutory rights"). You can enforce these rights against your retailer. However, at Shark®
we are so confident about the quality of our products that we give you an additional manufacturer's warranty
of up to five years upon registration with Shark. These terms and conditions relate to our manufacturer's
guarantee only – your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our guarantee. They do not affect your
statutory rights or the obligations of your retailer and your contract with them.
Shark Guarantees
®
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs
to work properly for as long as possible. The guarantee it comes with is an important consideration - and
reflects how much confidence the manufacturer has in its product and manufacturing quality.
Every Shark machine comes with a free parts and labour guarantee. Our customer service helpline (0800
862 0453) is open from 9.00am to 6.00pm Monday - Friday. It's free to call, and you'll be put straight
through to a Shark representative. You'll also find online support at sharkclean.eu/uk.
How do I register my extended Shark guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you'll need the following
information about your machine:
• Date you purchased the machine (receipt or delivery note)
• To register online, please visit sharkclean.eu/uk/register-guarantee
• Serial Number
IMPORTANT
• Both the 2 year and extended 3 year guarantee will only cover your product from the date of purchase.
• Please keep your receipt at all times. Should you need to use your extended guarantee we will need your
receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt
may invalidate your guarantee.
What are the benefits of registering my free Shark guarantee?
When you register your guarantee we'll have your details to hand if we ever need to get in touch. You can also
receive tips and advice on how to get the best out of your Shark vacuum and hear the latest news about new
Shark ® technology and launches.
If you register your guarantee online, you'll get instant confirmation that we've received your details.
How long are new Shark machines guaranteed for?
Our confidence in our design and quality control means that your new Shark vacuum cleaner is guaranteed
for a total of five years. (2 year and extended 3 year).
What is covered by the free Shark guarantee?
Repair or replacement of your Shark machine (at Shark's discretion), including all parts and labour. A Shark
guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark guarantee?
• Blockages – For details of how to unblock your vacuum cleaner, please refer to the Operating Manual.
• Normal wear and tear such as brush bar, fuse, belt, batteries etc.
• Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or
handling of the vacuum cleaner which is not in accordance with the Shark Operating Manual supplied
with your machine.
• Use of the vacuum cleaner for anything other than normal domestic household purposes.
• Use of parts not assembled or installed in accordance with the operating instructions.
• Use of parts and accessories which are not Shark Genuine Components.
• Faulty installation (except where installed by Shark).
• Repairs or alterations carried out by parties other than Shark or its agents.
What happens when my guarantee runs out?
Shark does not design products to last for a limited time. We do appreciate that there may be a desire for
our customers to want to repair their vacuum cleaners after the guarantee has elapsed. In this case please
contact our free phone customer service help line and ask about our out guarantee program,
on 0800 862 0453.
Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark vacuum.
You'll find a full range of Shark spares and replacement parts for all Shark machines at sharkclean.eu/uk/
parts. Accessories are at sharkclean.eu
Please remember that using non-Shark spares invalidates your guarantee.
20
s h a r kc l e a n . e u