What To Do If - Electrolux EEC5700 Notice D'utilisation

12. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows C3.
The display shows F102.
The display shows an er-
ror code that is not in this
list.
The display does not
show the time during the
off status.
All manuals and user guides at all-guides.com
Possible cause
The appliance is deacti- Activate the appliance.
vated.
The clock is not set. Set the clock. Refer to
"Setting and changing the
time".
The necessary settings Make sure that the set-
are not set. tings are correct.
The automatic switch-off Refer to „Automatic
is activated. switch-off".
The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact
a qualified electrician.
The lamp is defective. Replace the lamp.
You want to start the py- Fully close the door.
rolytic cleaning but you
did not fully close the
door.
The door lock is defec- • Fully close the door.
tive.
• Deactivate the appli-
• If the display shows
There is an electrical fault. • Deactivate the appli-
• If the display shows the
The display is deactiva-
Touch
ted.
same time to activate the
display again.
ENGLISH 29
Remedy
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
F102 again, contact
the Customer Care De-
partment.
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
error code again, con-
tact the Customer Care
Department.
and at the