What To Do If - Electrolux EOZ5700 Notice D'utilisation

12. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows C3.
The display shows F102.
The display shows an er-
ror code that is not in this
list.
The display does not
show the time during the
off status.
Problem Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic switch-off
is activated.
The fuse is released.
The lamp is defective.
You want to start the py-
rolytic cleaning but you
did not fully close the
door.
The door lock is defec-
tive.
There is an electrical fault. • Deactivate the appli-
The display is deactiva-
ted.
ENGLISH
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting and changing the
time".
Make sure that the set-
tings are correct.
Refer to „Automatic
switch-off".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact
a qualified electrician.
Replace the lamp.
Fully close the door.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
F102 again, contact
the Customer Care De-
partment.
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
Touch and at the
same time to activate the
display again.
27