Symbols Used In The Instructions; General Notes On Safety; General Safety Instructions For Power Tools - FLORABEST FKS 2200 F3 Traduction Des Instructions D'origine

GB
Graphical symbol on the fixing screw for
the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake lever:
O chain brake: OFF
I chain brake: ON
Symbols used
in the instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.

General notes on safety

Before you do any work with the elec-
tric chainsaw, make yourself familiar
with all operating parts. Practise using
the saw (sawing logs on a sawhorse)
and get an experienced user or a spe-
cialist to explain to you the function of
the saw, the way of working, the tech-
niques of sawing and the personal
protection equipment.
Observe noise control and local
regulations.
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
6 2
All manuals and user guides at all-guides.com
General safety instructions
for power tools
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
Work area safety
•
•
•
Electrical safety
•
electric shocks and the risk of injury
and fire. There is a risk of injury!
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
CAUTION! The following states
how to avoid accidents and injuries
due to electric shock:
Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use