System Configuration - Mitsubishi Electric a Serie Manuel

α
2 Simple Application Controllers
9.1.2

System Configuration

Figure 9.2: System Configuration
AS-interface Master
Module
AS-interface
Power Supply
9.2 Specifications
For general specifications please refer to the Chapter 2.
Table 9.1: Hardware Communication Specifications
Number of I/O
I/O Refresh Time
Network Distance
External Power Voltage
External Power Current Consumption 40 mA or less
EC Directive
Complies with
Table 9.2: Software Communication Specifications
Item
Station Number
IO Code
ID Code
Data Bit
Parameter Bit
System Bit
Control Bit
*1 Function to reset input signal (E01 - E04) when AS-interface communication is cut for 70
ms or more.
AS-interface Slave
(Sensor / Actuator)
AS-interface Slave
(Sensor / Actuator)
Item
4 Input (E01-E04) 4 Output (A01-A04)
Max. 5ms
Max. 100m
Typ. 30.5V DC (AS-interface Power supply)
EMC
AS-interface Certification
Set by Master Station (Factory default 0)
7
F
D0 - D3 Input/Output 01 - 04 (E01 - E04, A01 - A04)
P0
Communication monitor (set by default).
P1,P2,P3 Unused
M6 "ON" when communication Error of AS-interface occurs
M7 "ON" when communication Error by AS-interface power fail occurs
ON: Connect to AS-interface network
N1
OFF: Unconnected to AS-interface network
AL2-ASI-BD (AL2-14MR-*, AL2-24MR-* ) 9
AS-interface Slave
AS-interface Slave
α
( 2 Series
(Sensor / Actuator)
+ AL2-ASI-BD)
Content
Content
*1
ENG-45
ENG