Mitsubishi Electric a Serie Manuel page 20

α
2 Simple Application Controllers
2. Specifications
Note;
• Refer to chapter 9 about specification of the AL2-ASI-BD.
• Refer to chapter 11 about specification of the AL2-2DA.
• Refer to chapter 12 about specification of the AL2-2PT-ADP.
• Refer to chapter 13 about specification of the AL2-2TC-ADP.
2.1 Power Supply Specification
Table 2.1:
Description
Power Supply
Maximum Momentary Power
Failure
In-rush Current
Maximum Power
Consumption
Typical Power Consumption
(without Special Connection
Modules)
Fuse
Power Supply Specifications
AL2-***-A
AL2-***-D
AL2-***-A
AL2-***-D
AL2-***-A,
240V AC~ (120V AC~)
AL2-***-D, 24V DC
AL2-10MR-A, 264V AC~ 4.9 W
AL2-10MR-D, 28.8V DC 4.0 W
AL2-14MR-A, 264V AC~ 5.5 W
AL2-14MR-D, 28.8V DC 7.5 W
AL2-24MR-A, 264V AC~ 7.0 W
AL2-24MR-D, 28.8V DC 9.0 W
AL2-10MR-A, 240V AC~ I/O all On - 3.5 W; I/O all Off - 1.85 W
AL2-10MR-A, 120V AC~ I/O all On - 3.0 W; I/O all Off - 1.55 W
AL2-10MR-D, 24V DC
AL2-14MR-A, 240V AC~ I/O all On - 4.5 W; I/O all Off - 2.0 W
AL2-14MR-A, 120V AC~ I/O all On - 3.5 W; I/O all Off - 1.5 W
AL2-14MR-D, 24V DC
AL2-24MR-A, 240V AC~ I/O all On - 5.5 W; I/O all Off - 2.5 W
AL2-24MR-A, 120V AC~ I/O all On - 4.5 W; I/O all Off - 2.0 W
AL2-24MR-D, 24V DC
AL2-***-A
AL2-10MR-D
AL2-14MR-D
AL2-24MR-D
Code
100 - 240V AC~, +10% -15%, 50/60 Hz
24V DC, +20% -15%
10ms
5ms
≤ 6.5 A (3.5 A) < 5ms
≤ 7.0 A
I/O all On - 2.5 W; I/O all Off - 0.75 W
I/O all On - 4.0 W; I/O all Off - 1.0 W
I/O all On - 5.0 W; I/O all Off - 1.0 W
Rating: 250 V 1 A
Type: Time Lag
Rating: 250 V 500 mA
Type: Time Lag
Specifications 2
Specification
ENG-8