Mitsubishi Electric a Serie Manuel page 25

α
2 Simple Application Controllers
Table 2.7: Environmental and Electrical Specifications
Description
Temperature for the Ball
Pressure Test
Working altitude
Installation location
Overvoltage category
EC Directive
Certification of UL/cUL
Liquid Crystal Display
α
*1 2 Series Controller cannot be used at a pressure higher than the atmospheric pressure
to avoid damage.
α
*2 2 Series Controller is assumed to be installed in an environment equivalent to indoor.
α
*3 For 2 Series Controllers manufactured before February 28th, 2018 are compliant with
EN61131-2:2007, after March 1st, 2018 are compliant with EN61010-2-201:2013.
*4 For some models manufactured after January 1st, 2018 are compliant with EN61010-2-
201:2013.
*5 AL2-ASI-BD is not complied with these standards.
Caution for compliance with LVD Directive (EN61010-2-201:2013)
• Please use the
under a general industrial environment.
α
• 2 Series Controller are open-type devices that must be installed and used within
conductive control panels. Please secure the control panel lid to the control panel (for
conduction). Installation within a control panel greatly affects the safety of the system and
aids in shielding noise from the
• For the control panel, use the product having sufficient strength, fire protectiveness and
shielding property to an installation environment.
• To an external connection port other than AC power supply terminal and AC input/output
terminal, connect the circuit separated from a dangerous voltage by a double/reinforced
insulation.
• When wiring, please insert the cable all the way in the terminal block.
• Cutoff device such as a breaker or a circuit protector should be installed in accordance with
the following precautions.
- Use EN60947-1 or EN60947-3 standards.
- Place the cutoff device so that it can be operated easily.
- Specify that the cutoff device is for this equipment.
75°C (167°F)
*1
<2000 m
Inside a control panel
ΙΙ
EN61131-2: 2007
EMC
EN60730-1: 2011
EN61131-2: 2007
LVD
EN61010-2-201:2013
EN60730-1: 2011
File number: E95239
Will display 4 lines of 12 characters per line, Program Run On/Off mode,
Password Protection, Image Table, and Function Blocks during
programming.
α
2 Series Controller while installed in conductive shielded control panels
α
2 Series Controller.
Specification
*2
*3
*3*4
*5
Specifications 2
ENG
ENG-13