Product Features; Inserting/Replacing The Battery - Bosch DLE 70 Professional Notice Originale

20 | English

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Reference level button
2 Memory retrieve button "M="
3 Memory add button "M+"
4 Button for minimum and maximum
measurement
5 Button for length, area and volume
measurement
6 Spirit level
7 Display
8 Alignment aid
9 Laser warning label
10 Button for measuring and continuous
measuring
11 Button for indirect length measurement and
measurement of wall surfaces
12 Memory subtraction button "M – "
13 Button for continuous laser beam
14 On/Off and memory delete button
15 Positioning pin
16 Latch of the positioning pin
17 1/4" thread
18 Latch of battery lid
19 Battery lid
20 Serial number
21 Laser beam outlet
22 Reception lens
23 Tripod*
24 Laser viewing glasses*
25 Laser target plate*
26 Carrying strap
27 Protective case
*The accessories illustrated or described are not
included as standard delivery.
1 609 929 R53 | (23.7.08)
All manuals and user guides at all-guides.com
Display Elements
Assembly

Inserting/Replacing the Battery

Use only alkali-manganese or rechargeable
batteries.
Fewer measurements are possible when using
1.2 V rechargeable batteries as compared with
1.5 V batteries.
To open the battery lid 19, press the latch 18 in
the direction of the arrow and remove the bat-
tery lid. Insert the batteries provided. Pay atten-
tion to the correct polarity of the batteries
according to the representation in the battery
compartment.
When the
play for the first time, then at least 100 measure-
ments are still possible. The batteries must be
replaced when the battery symbol flashes;
taking measurements is no longer possible.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
a Measured values stored
b Battery indication
c Temperature indicator
d Measured value/result
e Unit of measure
f Measurement reference level
g Laser switched on
h Individual measured value (for length
measurement: result)
i Measuring functions
Length measurement
Area/surface measurement
Volume measurement
Indirect length measurement
Wall surface measurement
Continuous measurement
MIN Minimum measurement
MAX Maximum measurement
battery symbol appears in the dis-
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
Bosch Power Tools