Operating Positions - Bosch MaxxiMUM MUMXX Serie Notice D'utilisation

MUMXX_en-fi.book Seite 6 Montag, 8. September 2014 3:05 15
en
3 Rotary switch
When the appliance has been switched
off (0/off position), it automatically runs
to the optimum position for changing
the tools (tool change position).
This position also facilitates filling the
bowl with ingredients, as no ingredients
can stick to the tools ("Easy fill" position).
0/off = Stop
M/S = M stands for the pulse switch
at maximum speed, hold down switch
for required blending duration.
S stands for automatic SensorControl.
When the SensorControl (4) is activated,
the appliance automatically switches
off when the optimum result is obtained.
Settings 1–7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
4 Operating buttons on the automatic
SensorControl
See Section "Working with SensorControl".
5 Drive cover
To remove the drive cover, press
on the front area and remove cover.
6 Drive for
– continuous-feed shredder *,
– citrus press * and
– grain mill *.
When not in use, attach the drive cover.
7 Drive for tools (stirrer, whisk, kneading
hook) and mincer *
8 Drive cover
9 Drive for blender
When not in use, attach the blender
drive cover.
10 Blender drive cover
11 Cord store
Cord store or automatic cord winder
(depending on model)
Bowl with accessories
12 Stainless steel stirring bowl
13 Lid
14 Funnel
Tools
15 "Absolute" stirrer
16 Solid metal whisk
17 Kneading hook "High performance"
with dough deflector
Blender
*
18 Blender holder with blade
19 Blender jug (glass)
6
All manuals and user guides at all-guides.com
20 Lid with feed tube
21 Funnel
* If an accessory is not included in the pro-

Operating positions

Warning!
Before operating the appliance, attach
the tool/accessory to the correct drive
and in the correct position and place
in the operating position according
to this table.The multi-function arm must
be engaged in each operating position.
The multi-function arm features the "Easy
Armlift" function which supports the simple
and effortless operation of the multi-
function arm.
Setting the operating
position


Overview of the operating positions
Position
*
duct package, it can be purchased
via the trade or customer service.
Note:
Press release button and move multi-
function arm.
Support movement with your hand.
Move multi-function arm until it engages
in the required position.
Drive Tool/
Accessory
1 *
2 6
3 5
4 5
5 8
6 6
Insert/remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
Robert Bosch Hausgeräte GmbH
Fig. 
Operating
speed
–
1–5
1–7
1–3
3–7
3–5
5–7
5–7