Original Operating Manual/Spare Parts List - Festool MXC Notice D'utilisation D'origine

Original operating manual
1 Symbols .................................. 9
2 Machine features ...................... 9
3 Intended use............................ 9
4 Technical data .......................... 9
5 Safety instructions .................... 9
6 Operation ................................ 10
7 Service and maintenance ........... 10
8 Accessories .............................. 10
9 Disposal .................................. 10
10 Warranty ................................. 10
11 EU Declaration of Conformity...... 11
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Do not throw in the household waste.
2 Machine features
[1-1] Battery pack
[1-2] Charger
[1-3] LED-Display
3 Intended use
The charger MXC is designed for charging the
battery packs listed.
The charger is designed for internal use only.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
4 Technical data
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
All manuals and user guides at all-guides.com
MXC
14,4 - 15,6 V ~
50/60 Hz
10.8 V=
typ. 2.8 A
Charger
LiIon 1,5 Ah, 80 %/ 100 %
Permitted operating tem-
perature range
Temperature monitoring
5 Safety instructions
5.1 General safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
5.2 Machine-related safety instruc-
tions
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger or power tool is to be used.
Children should always be supervised to
ensure that they do not play with the
charger or the power tools.
– Do not open the battery pack or the charg-
er. Even after disconnection from the
mains, there is still a high capacitor voltage
inside the charger.
– Make sure that metal objects (such as met-
al chips) or fluids do not collect in the bat-
tery pack retaining slots or enter the
machine through the air vent slits (danger
of short circuit).
– Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
external manufacturers. Otherwise there is
a danger of fire and explosion.
– Protect the device against water.
– Protect the cable against heat, oil and
sharp edges..
– Check the plug and the cable regularly and
should either become damaged, have
them replaced by an authorised after-sales
service workshop.
GB
MXC
MXC
approx. 23/ 35
min
-10 °C to
+ 40 °C
via NTC-resistor
9