Generac Mobile Link Manuel Du Propriétaire Et Manuel D'installation page 21

8. Inspect the area behind the external breaker box to make sure all
wires are moved out of the way to prevent damage during drilling.
See Figure 3-4.
Figure 3-4. Checking Wire Clearance
9. Using the template provided with these instructions, make a
1/8" hole just behind the breaker box. See Figure 3-5.
NOTE: 2013 and later models have a prepositioned dimple to mark
the center of the hole.
Mobile Link
Figure 3-5. Drilling Mounting Hole
1
15