Key Descriptions - Baxtran STD Manuel D'usager

User's Guide
INSTALACIÓN DE LA SERIE STD
Please make the load cell connector from the load cell follow the drawing below
Attach the AC power adapter to the connector on the back of the indicator.
If you use TR for a platform scale, you can use attached indicator bracket, this indicator bracket is
design for 38mm pole.
Load cell connect as below( 5pin air connecter)
ZERO
Set the zero point for all subsequent weighing. The display shows zero.(only when the weight is less
than 10% capacity)
Tare the scale. Stores the current weight in memory as a tare value, subtracts the tare value from the
weight and shows the results. This is the net weight. Entering a value using the keypad will store that
value as the tare value. (only when the weight is large than 10% capacity)
A secondary function
DIV
Change the division of the scale. This scale has two division (high and low) could be selected.
20
EXC +
SEN +
SIG +
LOAD CELL
SEN -
EXC -
of "Enter" key when setting parameters or other functions.
SIG -
5
5
3
2
4
4
1
SHIELD

4. KEY DESCRIPTIONS

STD