WARNING! This machine is not
!
electrically insulated. If the machine
touches or comes close to high-voltage
power lines it could lead to death or
serious bodily injury. Electricity can
jump from one point to another by
arcing. The higher the voltage, the
greater the distance electricity can jump.
Electricity can also travel through
branches and other objects, especially if
they are wet. Always keep a distance of
at least 10 m between the machine and
high-voltage power lines and/or any
objects that are touching them. If have to
work within this safe distance you
should always contact the relevant
power company to make sure the power
is switched off before you start work.
WARNING! This machine has a long
!
reach. Make sure that no people or
animals come closer than 15 m when the
machine is running. Never swing the
machine around without first checking
behind you to make sure no-one is within
the safety zone.
•
Whenever possible position yourself so that you can
make the cut at right angles to the branch.
90°
•
Do not work with the shaft held straight out in front of
you (like a fishing rod) as this increases the apparent
weight of the cutting attachment.
•
Cut large branches in sections so that you have better
control over where they fall.
All manuals and user guides at all-guides.com
WORKING TECHNIQUES
•
Never cut through the swelling at the root of the
branch as this will slow down healing and increase the
risk of fungal attack!
•
Make an initial cut on the underside of the branch
before cutting through the branch. This will prevent
tearing of the bark, which could lead to slow healing
and cause permanent damage to the tree. The cut
should not be deeper than 1/3 of the branch thickness
to prevent jamming. Keep the chain running while you
withdraw the cutting attachment from the branch to
prevent it jamming.
•
Use the harness to support the weight of the machine
and make it easier to handle.
•
Make sure you have a firm footing and that you can
work without being hampered by branches, stones
and trees.
WARNING! Never activate the throttle
!
without having the cutting attachment in
full view.
–
English
83