Telescopic function
The shaft of the machine is telescopic. To change the
length of the shaft, do the following:
•
Undo the knob.
•
Pull out the shaft to the desired length.
•
Tighten the knob.
Adjusting the harness
You should always use the harness with the machine to
give maximum control over the machine and reduce the
risk of fatigue in your arms and back.
•
Put on the harness.
•
Hook the harness in one of the hooks on the machine.
76 – English
All manuals and user guides at all-guides.com
ASSEMBLY
•
Adjust the length of the harness so that the support
hook is roughly level with your right hip.