Ariens Sno-Tek 24E Manuel Du Propriétaire page 34

All manuals and user guides at all-guides.com
PROBLEM PROBABLE CAUSE
Unit throws 1. Shear bolts broken.
snow poorly
2. Attachment clutch/brake
or does not
throw snow.
3. Impeller is frozen in
4. Ice or debris is
5. Attachment drive belt
Unit runs 1. A build up of fumes in the
briefly then
stops.
TROUBLESHOOTING
not adjusted properly.
place.
obstructing auger.
slipping, worn or
damaged.
fuel tank is creating too
much pressure in the fuel
tank.
GB - 34
CORRECTION
1. Replace shear bolts (see Shear
Bolts on page 24).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 26).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belt. To adjust belt see
Attachment Clutch/Brake
Adjustment on page 26. To
replace belt see Attachment
Drive Belt Replacement on
page 28.
1. Carefully loosen the cap to the
fuel tank.