Chapter II
5.11.
Duty cycle: %+, %-
x 100
% + =
T
Resolution :
Minimum duration for or T - :
Maximum duration for T :
Minimum duration for T :
Absolute error as a % :
Sensitivity : Refer to sensitivity in frequency measurement mode
Absolute additional error on , due to the zero crossing slope : 0.1 x
with C : V or A range (C : 5000 V for 600 V
with P : slope in V/s or in A/s
5.12.
Positive ( ) or negative (
Minimum pulse duration :
Count up to :
Limit of triggering :
Reset the count to zero with the REL key.
5.13.
Positive ( ) or negative (
Resolution :
Minimum pulse width :
Accuracy :
Maximum duration of a period :
Limit of triggering :
Additional error on measurement due to the zero crossing slope : refer to duty cycle
measurement.
5.14.
Temperature function
Temperature range :
Resolution :
Accuracy :
Temperature sensors * :
Unity * :
Connection* resistance compensation with REL key
* refer to §. 4.1.7. for Pt 100/Pt 1000 selection, C / F selection and connection resistance
compensation procedure.
Warning !
Intrinsically safe portable digital multimeter
x 100
% - =
T
T
) pulse count
) pulse width
Only use probes (system manufacturer's certification) with a
certificate of conformity authorising their use with this multimeter.
T
0.01%
2 µs
0.8 s
100 µs
4
310
.
T
or 600 V
ranges
DC
AC
2 µs
99999
3 % of range except in :
600 V
and 600 V
ranges (limit : 150 V)
AC
DC
This limit is positive in ( ) and negative in (
10 µs
20 µs
0.1 % ± 10 µs
12.5 s
3 % of range except in :
600 V
and 600 V
AC
DC
This limit is positive in ( ) and negative in (
-200 C to + 800 C
0.1 C
1 C
from -150 C to -125 C
0.5 C from -125 C to 75 C
1 C
from 75 C to 700 C
platinum probes Pt 100 or Pt 1000
C or F
X02137E00 - Ed. 1 - 02/17
C
P
ranges (limit : 150 V).
).
).
41