- Download and install the EZVIZ app by searching "EZVIZ" in App Store or Google Play
- Launch the app and register for an EZVIZ user account following the start-up wizard.
2. Add a security light camera to EZVIZ
- Log in the EZVIZ app.
- From the EZVIZ app Home screen, tap "+" on the upper-right hand corner to go to the scan QR code interface.
- Scan the QR Code on the the security light camera.
- Follow the EZVIZ app wizard to finish Wi-Fi configuration.
If you want to change your security light camera's Wi-Fi, press and hold the reset button for 5s and repeat this part.
• The security light camera works with 2.4GHz Wi-Fi signals. If you have a dual-band router with separate 2.4GHz and 5GHz networks, make sure your phone is connected to the 2.4GHz one.
• If your Wi-Fi network signal is less than 50% where you want to install the security light camera ,a Wi-Fi signal extender is recommended to boost the signal at the installation point.